Filter
Top Products
Model T26416 Crown Stapler -5-
SECTION 2: INTRODUCTION
We are proud to offer this manual! We've
made every effort to be exact with the
instructions, specifications, drawings,
and photographs we used when writing
this manual. However, sometimes we still
make an occasional mistake.
Also, owing to our policy of continuous
improvement, your stapler may not exactly
match the manual. If you find this to be
the case, and the difference between the
manual and stapler leaves you in doubt,
check our website for the latest manual
update or call technical support for help.
For your convenience, we post all avail-
able manuals and manual updates for
free on our website at www.grizzly.com.
Any updates to this model of tool will be
reflected in these documents as soon as
they are complete.
Foreword
Operating Pressure ............................................................................................ 70–120 PSI
Staple Size ............................................................................................................. 18 Gauge
Staple Length ................................................................................................................
1
⁄2"–1"
Staple Crown ......................................................................................................................
1
⁄4"
Magazine Capacity ..............................................................................................100 Staples
Specifications
Contact Info
We stand behind our tools. If you have
any service questions, parts requests or
general questions about the tool, please
call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
E-Mail: techsupport@grizzly.com
We want your feedback on this manual.
If you can take the time, please email or
write to us at the address below and tell
us how we did:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com