Filter
Top Products
Model T26416 Crown Stapler -7-
Loading Staples
Use the following specifications when
obtaining staples for this stapler:
Gauge .....................................................18
Length............................................
1
⁄2" to 1"
Capacity ................................................100
Crown .....................................................
1
⁄4"
To load the stapler:
1. DISCONNECT STAPLER FROM AIR
SUPPLY!
2. Grip the stapler firmly, unlock the quick
release latch and pull the pusher back
(see Figure 2).
Figure 2. Example of unlocking quick
release latch.
3. With the stapler pointing up, insert a
stick of staples (pointing outward) into
the magazine, as shown in Figure 3.
Figure 3. Example of inserting staples into
magazine.
4. Slide the magazine pusher and the
stick of staples towards the nose of
the stapler until the quick-release latch
locks.
Air Deflection
This stapler is equipped with an air deflec-
tor that rotates 360 degrees. Prior to using
the stapler, adjust the deflector to direct
released air away from yourself and others
(see Figure 4).
Figure 4. Air deflector.
Air Deflector