Filter
Top Products
1 - 4 Dolphin® 7200 User’s Guide
Regulatory and Safety Agency Approvals
The CE mark on the product indicates that the system has been tested to and conforms with the provisions noted within
the 89/336/EEC Electromagnetic Compatibility Directive and the 73/23/EEC Low Voltage Directive.
For further information please contact:
Hand Held Products, Inc.
5627 BT Eindhoven
The Netherlands
Hand Held Products shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that
is not CE marked and does not comply with the Low Voltage Directive.
Batteries
• Use only the battery supplied with your Dolphin or a replacement battery supplied, recommended, or approved by Hand Held
Products.
• Replace a defective battery immediately as it could damage the Dolphin terminal.
• Never throw a used battery in the trash. It contains heavy metals and should be recycled according to local guidelines.
• Don't short-circuit a battery or throw it into a fire. It can explode and cause severe personal injury.
• Excessive discharge damages a battery. Recharge the battery when your Dolphin indicates low battery power.
• Although your battery can be recharged many times, it will eventually be depleted. Replace it after the recommended usage
period (about 500 charge cycles for the 1500 mAh NiMH battery) or if the battery does not hold a charge.
• If you are not sure the battery or charger is working properly, please send it to Hand Held Products or an authorized Hand
Held Products service center, for inspection.
The Dolphin handheld computer/bar code scanner meets or exceeds all applicable standards and has been manufactured to the
highest level of quality.
Care and Cleaning of the Dolphin
When needed, clean the laser engine window and the LCD display with a clean non-abrasive, lint-free cloth.
Parameter Specification
U.S.A. FCC Part 15, Class A
Canada IEC 0003
Europe EN 55022 (CISPR22) Class A
EN 55024