Filter
Top Products
Dolphin® 7200 User’s Guide 9 - 9
Communicating with the Dolphin Terminal
To communicate with the Dolphin and any other devices connected to the Compact HomeBase:
1. Insert the Dolphin into the terminal well of the HomeBase. If the Dolphin is in sleep mode, it will awaken into active state.
2. The CHARGING MAINBATT LED on the HomeBase will turn on. If the Dolphin does not turn on, or the LED does not light
up, make sure that it is properly seated in the terminal well and that the power supply is properly connected to the
HomeBase and plugged into a functioning AC outlet.
3. Start your application on the Dolphin terminal or the host computer. Data can then begin transmitting between the terminal
and the devices connected to the Dolphin HomeBase.
When data transfer begins, the COMM LED on the Dolphin HomeBase will blink red and green. If the HomeBase will not
communicate with the Dolphin, check the port connections to ensure that the HomeBase is correctly configured.