Harbor Freight Tools 05154 Sander User Manual


 
SKU 05154 PAGE 13
FIGURE H
LOCK
SCREW
(15)
WORK
TABLE
(13)
ANGLE
PLATE
(14)
To Adjust The Angle Of The Miter Guide:
1. The angle of the Miter Guide (21) may be adjusted to the right 0 to 45 degrees
and to the left 0 to 45 degrees. (See Figure I.)
2. To adjust the angle of the Miter Guide (21), slightly loosen the Miter Guide Knob
(22). (See Figure I.)
3. Observe the gauge on the Miter Guide (21). Move the Miter Guide to the right or
left until the desired angle is indicated on the gauge. Then, retighten the Miter
Guide Knob (22) to lock the Miter Guide in place. (See Figure I.)
MITER
GUIDE
(21)
MITER
GUIDE
KNOB
(22)
FIGURE I