Harbor Freight Tools 05154 Sander User Manual


 
PRODUCT SPECIFICATIONS
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
SKU 05154 PAGE 2
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
When unpacking, check to make sure all the parts shown on the Parts List on page 19
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
UNPACKING
Item Description
Electrical Requirements 110V / 60 Hz / 1/2 HP / 1720 RPM / Single Phase.
Sanding Belt Size 4” x 36”.
Sanding Disc Size 6” Diameter.
Sanding Belt Speed 1125 FPM (Feet Per Minute).
Sanding Disc Speed 1720 RPM (Revolutions Per Minute).
Table Surface Dimensions 7-1/2” x 5”.
Table Tilt Capability 0º - 45º.
Additional Features Miter Gauge / Adjustable Backstop.
Accessories Hex Key.