Filter
Top Products
THANK YOU for choosing a Harbor Freights Tool product! For future reference, please complete the
owner’s record below:
Model: _________________ Serial No: __________________________ Purchase Date: ______________
SAVE THE RECEIPT, WARRANTY CARD AND THESE INSTRUCTIONS. It is important that you read the entire
manual to become familiar with the unit BEFORE you begin assembly.
Technical Specifications
SKU: 38144
Model: 13 inch Drill Press-16 Speed, Floor Model
Power Source: 120V, 60HZ, Single-Phase,
Speeds: Sixteen (16) speeds ranging from 220 to 3600 RPMs
Drill Chuck Capacity: 7/64” to 5/8”
Spindle Stroke: 3-1/8”
Swing: 13-1/2”
Column Diameter: 2-57/64”
Table Type: 11-1/2” square-dry table that rotates 360 degrees and tilts 0-45 degrees in one-degree increments.
Table T-Slot Dimensions: 1/2”
Overall Height: 62-7/8”
Unpacking
Unpack and check contents. Make sure you have all parts described in the Parts Lists and Figure 1 on page 3.
Remove all preservative lubricants from parts with a clean dry cloth.
Some of the parts are heavy and may require two people for lifting.
If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353. The shipping box should contain:
A. Table Assembly F. Head Assembly
B. Arm G. One (1) box of loose parts
C. Instruction manual and warranty card
D. One Bag of Parts J. Column Assembly
E. Base
#38144 REV 10/03 REV 03/04 Page 2