Filter
Top Products
Page 2SKU 44914
REV 06/01; 02/04; 03/07
Specifications
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks which may ignite the
dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from debris
such as chips and sparks. Provide barriers or shields as needed.
ELECTRICAL SAFETY
4. Grounded tools must be plugged into an outlet properly installed and grounded
in accordance with all codes and ordinances. Never remove the grounding prong
or modify the plug in any way. Do not use any adapter plugs. Check with a qualified
electrician if you are in doubt as to whether the outlet is properly grounded. If the
tools should electrically malfunction or break down, grounding provides a low resistance
path to carry electricity away from the user.
Save This Manual
You will need the manual for the safety warnings and precautions,
assembly instructions, operating and maintenance procedures, parts list and
diagram. Keep your invoice with this manual. Write the invoice number on the
inside of the front cover. Keep the manual and invoice in a safe and dry place for
future reference.
rotoM
,MPR000,62,pma)putrats(4.2,zH06,V021
W004
droCeniLdetsil.L.U,deziralopgnorp-2:gulP;teef7
telloChcni4/
1
seirosseccA
dedulcnI
ediuGremmirT
hcnerWeldnipS
sehcnerWtelloC
thgieWsbl51.3
E194601