Filter
Top Products
Page 7For technical questions, please call 1-800-444-3353.SKU 66755
be serviced before use. Lower Guard
may operate sluggishly due to damaged
parts, gummy deposits, or a build-up of
debris.
Lower Guard (A7) on the Circular Saw 12.
should be retracted manually only for
special cuts such as ″plunge cuts″
and ″compound cuts.″ Raise Lower
Guard by retracting handle and as
soon as blade enters the material, the
Lower Guard must be released. For all
other sawing, the Lower Guard should
operate automatically.
Always observe that the Lower Guard 13.
(A7) on the Circular Saw is covering
the blade before placing saw down on
bench or oor. An unprotected, coasting
blade will cause the saw to walk back-
wards, cutting whatever is in its path. Be
aware of the time it takes for the blade to
stop after switch is released.
The Circular Saw is designed for use 14.
only with a 5-1/2” diameter Saw Blade
having a 10mm arbor and rated to
4,000 RPM or greater. Do not use any
other rated blade.
To prevent serious injury from ying 15.
shrapnel, do not use any abrasive
wheels on the circular saw. The saw
and its guards are not designed to ac-
commodate abrasive wheels.
Drill Safety Warnings
Hold power tools by insulated grip-1.
ping surfaces when performing an
operation where the cutting tool may
contact hidden wiring or its own cord.
Contact with a ″live″ wire will make ex-
posed metal parts of the tool ″live″ and
shock the operator.
Reciprocating Saw Safety Warnings
Hold power tool by insulated gripping 1.
surfaces when performing an opera-
tion where cutting tool may contact
hidden wiring or its own cord. Con-
tact with a ″live″ wire will make exposed
metal parts of the tool ″live″ and shock
the operator.
Use clamps or another practical way 2.
to secure and support the work piece
to a stable platform. Holding the work
by hand or against your body leaves it
unstable and may lead to loss of control.
When using the Reciprocating Saw, 3.
do not cut material that is thicker than
the Saw Blade is long. Allow for blade
stroke.