Filter
Top Products
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front cover.
Keep this manual and invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
SKU 95141 For technical questions, please call 1-800-444-3353 PAGE 2
UNPACKING
When unpacking, check to make sure that all the parts and accessories listed on page 8
are included, and the product is intact and undamaged. If any parts are missing or broken,
please call Harbor Freight Tools at the number shown on the cover of this manual as soon
as possible.
WARNING! Use eye and hearing protection. Always wear ANSI
approved safety impact goggles when using this Impact Wrench. Also,
wear ANSI approved hearing protection. Other people in the work area
must also wear appropriate ANSI approved safety equipment.
1.
2. Keep work area clean. Cluttered areas invite accidents.
Item Description
Drive Size 3/4” Square Drive
Impact Mechanism Twin Hammer
Maximum RPM 4300
Anvil Retainer Type Hog Ring
Maximum Torque 1300 Ft./Lb.
Blows Per Minute 960
Air Inlet Size 3/8”-18 NPT
Recommended Hose Size 1/2” Inside Diameter (Not Included)
Air Consumption 9.3 SCFM @ 90 PSI
Overall Dimensions 12.2” Long x 11/4” Wide x 4.7” High
Net Weight 12.5 Lb.
3. Stay within air pressure capacity. Never operate the Impact Wrench above
90 PSI.
4. Observe work area conditions. Keep work area well lit. Do not use pneumatic