Filter
Top Products
8. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid foot-
wear are recommended when working. Wear restrictive hair covering to contain
long hair.
9. Do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running tools or air hoses.
10. Disconnect air hose and release any built-up air pressure. Never service the
Impact Wrench or disassemble with the air hose attached. Always release any
built-up air even after disconnecting hose. Disconnect the Impact Wrench when
not in use.
SKU 95141 For technical questions, please call 1-800-444-3353 PAGE 3
6. Store idle equipment. When not in use, tools must be stored in a dry location
to inhibit rust. Always lock up tools and keep out of reach of children.
7. Use the right tool for the job. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which
this tool was designed. It will do the job better and more safely at the rate for
which it was intended. Do not modify this tool, and do not use this tool for a
purpose for which it was not intended.
tools in the presence of flammable gases or liquids.
5. Keep children away. Children must never be allowed in the work area. Do not
let them handle machines, tools, extension cords, or air hoses.
11. Avoid unintential starting. Be sure the Trigger (27) is in the OFF position
when not in use and before plugging in. Do not carry any tool with your finger on
the Trigger, whether it is attached to an air source or not.
12. Stay alert. Watch what you are doing. Use common sense. Do not operate any
tool when you are tired or distracted.
13. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment and binding of moving
parts, any broken parts, and any other condition that may affect proper operation.
Any part that is damaged should be properly repaired or replaced by a qualified
technician. Do not use the tool if the Trigger does not operate properly.
14. Replacement parts and accessories. This product is to be repaired and
serviced only by a qualified technician. When this product is serviced, only
identical replacement parts should be used. Use of any other parts will void the
warranty. Only use accessories intended for use with this tool. Approved
accessories are available from Harbor Freight Tools.