Filter
Top Products
SKU 95346 For technical questions, please call 1-800-444-3353 PAGE 12
INSPECTION, MAINTENANCE, AND CLEANING
WARNING! Always make sure the Spark Plug (51) is removed and the engine
has cooled completely prior to performing any service, maintenance, or cleaning
of the Auger Drill.
Before each use: Inspect the general condition of the Auger Drill. Check mis-
alignment or binding of moving parts, cracked or broken parts, dull or damaged
Auger (33a), and any other condition that may affect the safe operation of the tool.
If abnormal noise or vibration occurs, have the problem corrected before further
use. Do not use damaged equipment.
Auger (33a) maintenance: An Auger that is bent or lled with excessive dirt and
debris can cause possible personal injury. Replace a damaged Auger and keep
the Auger clean at all times.
Spark Plug (51) maintenance: The condition of the Spark Plug should be checked
every six months or 100 hours of tool use. If necessary, clean or replace the Spark
Plug. The recommended Spark Plug replacement type is: “L7T”.
Air Filter (78) maintenance: The Air Filter should be checked prior to each use of
the Auger Drill for excessive dirt and debris buildup. Thereafter, the Air Filter should
be cleaned or replaced every three months or 50 hours of tool use.
Gearbox (8a) maintenance: The Gearbox should be checked prior to each use
of the Auger Drill for proper quantity. If necessary, ll the Gearbox with SAE 80-90
weight gear oil. The Gearbox should be lled with clean, new gear oil every three
months or 50 hours of tool use.
To clean the Auger Drill: Use a clean cloth and a mild detergent to clean the ex-
terior of the Engine. Do not use solvents. Use a garden hose to clean the Auger
(33a). Do not introduce liquids into the interior of the Engine.
When storing the Auger Drill: Before storing, drain all fuel out of the tool’s Fuel
Tank (89). If this is not followed, old fuel in the Fuel Tank may clog the Carburetor
and prevent the tool from starting until cleaned out. Then store the tool in a clean,
dry, safe location out of reach of children and other unauthorized people.
CAUTION! All maintenance, service or repairs not mentioned in this
manual must only be performed by a qualied service technician.
1.
2.
3.
4.
5.
6.
7.
8.
9.