Filter
Top Products
SKU 95346 For technical questions, please call 1-800-444-3353 PAGE 2
REV 07b, 07e
SPECIFICATIONS
Engine Specifications 1.5 HP / 52cc / Single Cylinder / 2-Stroke / Recoil Start
Fuel Required 25:1 Unleaded Gasoline (89 octane or better) & 2 Cycle Oil Mixture
Fuel Tank Capacity 0.26 Gallon
Recommended Gear Oil SAE 80 – 90 Weight Gear Oil
Rotation Single Rotation Only (Clockwise)
Drilling Speed 150 RPM
Maximum Drilling Depth 1’ 10”
Auger Diameter 4”
Overall Bit Length 2’ 6-3/4” Long
Cutting Edge Length 2’ Long
Drive Shaft 7/8” Diameter x 1-1/2” Long
Accessories Auger Bit / Fuel & Oil Mixing Container / Spark Plug Wrench
Flat Head Screwdriver / Hex Keys (Qty. 2) / Storage Bag
Weight 17-1/4 lb. (without fuel and oil)
This product requires a 25:1 ratio of unleaded fuel and 2-cycle oil to be added to
its fuel tank before starting. Attempting to start the Engine with an improper fuel mix, low
or no fuel mix WILL ruin the Engine and void the warranty.
This product requires the proper amount of SAE 80-90 gear oil in its Gear Case
before starting. Attempting to start the Auger Drill with low or no gear oil WILL ruin the
Gear Case and void the warranty.
The Engine’s Carburetor may need to be adjusted by a qualied mechanic for ef-
cient high-altitude use.
The Emission Control System for this product’s engine is warranted for standards
set by the U.S. Environmental Protection Agency. For warranty information, refer to the
last pages of this manual.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.