Filter
Top Products
SKU 95346 For technical questions, please call 1-800-444-3353 PAGE 9
OPERATION
Starting and Stopping
WARNING! Always wear safety equipment. When operating the Auger Drill,
always wear ANSI-approved safety impact eye goggles, hearing protection, heavy
duty work gloves, sturdy work boots, and head protection.
Place the Auger Drill on its side with its Auger (33a) resting upon the ground surface
location that is to be drilled. Make sure that no debris, clothing, or other objects
are near the auger bit. Keep all bystanders away.
PRIMER (95)
CHOKE (76)
FRAME (1b)
STARTER
HANDLE
(7)
FIGURE C
Depress the Primer (95) three to four times. (See Figure C.)
Set the Choke (76) (See Figure C.) to the appropriate position:
Closed if the Engine is cold.
Open if the Engine is warm.
Grip the Frame (1b) rmly with your left hand. Keep all body parts well away from
the bit. Then, with your right hand, pull rapidly on the Starter Handle (7) to start
the Engine. (See Figure C.)
1.
2.
3.
4.
5.