Filter
Top Products
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and as-
sembly diagram. Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep this manual and invoice in a safe and dry
place for future reference.
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate the Planer in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power equipment creates
sparks which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating power equip-
ment. Distractions can cause you to lose control. Protect others in the work
SKU 95518 For technical questions, please call 1-800-444-3353 PAGE 2
WORK AREA
GENERAL SAFETY RULES
Item Description
Electrical Requirements 120 VAC / 60 Hz / 15 Amps
2.5 HP Motor / 16,500 RPM / 2-Speed
Cuts Per Minute: 11,000
Power Switch: Toggle ON/OFF Switch Type with Safety Key
Circuit Breaker: 20 Amps / Push Button to Reset
Power Cord: SJT 14 AWG x 3C / 6’9” Long
Power Plug: 3-Prong / Grounded
Stock Capacity 6” High x 15” Wide
Maximum Cutting Depth Up to 3/32”
Feed Rate 11 or 22 Feet Per Minute
Number of Cutting Knives 2
Dust Port Dimensions 2-5/8” High x 2-1/4” Outside Diameter
Features Auto-Feed Mode & Manual Mode / Motor Overload Protection
Depth of Cut Gauge / Workpiece Thickness Pre-Set Gauge
Built-In Dust Collector / Top Mounted Rollers for Workpiece Return
Infeed & Outfeed Tables with Rollers
Accessories Hex Wrench (Qty. 1) / Square Box Wrench (Qty. 1)
Open End Wrench (Qty. 1) / Magnets (Qty.2) / Dust Bag (Qty. 1)
Overall Dimensions 38” Long x 32-1/2” Wide x 25” High
Unit Weight 150 Pounds
REV 07e