Filter
Top Products
in. Plugging in power equipment with the Power Switch on, invites accidents.
5. Remove adjusting keys or wrenches before turning the power tool on. A
wrench or a key that is left attached to a rotating part of the Planer may
result in personal injury.
6. Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the Planer in unexpected
situations.
7. Use safety equipment. Always wear ANSI-approved safety impact
eye goggles. Dust mask or respirator, and hearing protection must be
used for appropriate conditions.
TOOL USE AND CARE
1. Do not force the Planer. Use the correct tool for your application.
The correct tool will do the job better and safer at the rate for which it is de-
signed.
2. Do not use the Planer if the Power Switch does not turn it on or off.
Any tool that cannot be controlled with the Power Switch is dangerous and must
be replaced.
3. Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the Planer. Such preventive
safety measures reduce the risk of starting the tool accidentally.
4. Store idle tools and equipment out of reach of children and other untrained
persons. Tools and equipment are dangerous in the hands of untrained users.
5. Maintain this product with care. Keep the Planer and its Tables clean and
in proper working order. Properly maintained tools and equipment are easier
to control. Do not use damaged tools and equipment. Tag damaged tools and
equipment “Do not use” until repaired.
SKU 95518 For technical questions, please call 1-800-444-3353 PAGE 4
7. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one product may become hazard-
ous when used on another product.
6. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the Planer’s operation. If damaged,
have the tool serviced before using. Many accidents are caused by
poorly maintained tools.