Filter
Top Products
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Planer. These carry important infor-
mation. If unreadable or missing, contact Harbor Freight Tools for a replace-
ment.
2. Avoid unintentional starting. Make sure you are prepared to begin work before
turning on the Router.
3. Do not force the Planer. This tool will do the work better and safer at the
speed and capacity for which it was designed.
4. WARNING! Keep hands and fingers away from the cutting area. Use a
“push stick” (not included) when necessary.
SKU 95518 For technical questions, please call 1-800-444-3353 PAGE 5
6. Never leave the Planer unattended when it is plugged into an electrical
outlet. Always unplug the unit from its electrical outlet before leaving.
SERVICE
1. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
2. When servicing a tool, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning”
section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
5. Make sure the Planer is used on a dry, flat, level, sturdy workbench surface
capable of supporting the weight of the unit, accessories, and workpieces.
7. Industrial applications must follow OSHA guidelines.
8. Never stand or sit on the Planer. Serious injury could result if the unit is tipped.
9. Always unplug the Planer from its power supply source before performing
any inspection, maintenance, or cleaning procedures.
10. Keep all guards in place and in proper working order.
11. Allow the Planer Knives to spin up to full speed before feeding a workpiece
into the unit. When turning off the Planer, allow the Knives to spin down and
stop on their own. Do not press against the Knives to stop them.