HP (Hewlett-Packard) 16500C Sander User Manual


 
R
Real numbers, 1–14
Real-time clock, 10–20
Receive Data (RD), 3–4 to 3–5
Remote enable (REN), 2–5
REName, 12–22
Request To Send (RTS), 3–5
Response data, 1–21
Responses, 1–17, 5–4
RMODe, 10–19
Root, 5–8
RQC, 7–5
RQS, 7–4, 9–16
RS-232-C, 3–2, 3–9, 6–2
RTC (real-time clock), 10–20
S
Scientific notation, 1–13
SDC, 2–6
SELect command, 10–21
command tree, 10–22
Selected device clear, 2–6
Sequential commands, 5–4
Serial poll, 7–8
Service Request Enable Register, 7–4
SETColor, 10–23
SETup, 11–12 to 11–13
Shortform, 1–12
SIGNal, 14–12
Signed numbers, 1–14
SIGSTatus, 14–13
Simple commands, 1–9
Skew, 13–7
SKEW command, 13–14
Slot numbers, 10–15
Spaces, 1–8, 1–14, 6–9
Square brackets, 5–5
STARt, 10–24
STATEs, 14–14
Status, 1–23, 7–2, 9–3
byte, 7–6
registers, 1–23, 9–3
reporting, 7–2
STEP, 14–15
Stop bits, 3–8
STOP command, 10–25
STORe:CONFig command, 12–23
String data, 1–14
String variables, 1–19
Subsystem commands, 5–6
INTermodule, 13–2,
MMEMory, 12–2
SYSTem, 11–2
TGTctrl, 14–2
Suffix multiplier, 6–9
Suffix units, 6–10
Syntax diagrams
Common commands, 9–4
IEEE 488.2, 6–5
INTermodule subsystem, 13–3 to 13–4
interpretation, 5–4
Mainframe commands, 10–3 to 10–4
MMEMory subsystem, 12–3 to 12–4, 12–6
SYSTem subsystem, 11–3
TGTctrl subsystem, 14–3 to 14–4
System commands, 5–6
System modules
talking to, 1–4
SYSTem subsystem, 11–2
SYSTem:SETup program, 15–3
T
Tabs, 1–8
Talk only mode, 2–3
Target Control menu, 14–2
Terminator, 1–8
TGTctrl subsystem, 14–2, 14–5
Three-wire Interface, 3–4
TOGgle, 14–15
Trailing dots, 5–5
Transmit Data (TD), 3–4 to 3–5
TREE command, 13–15
Trouble
connecting, 4–5
X Window, 10–26
Truncation rule, 5–3
TTIMe query, 13–17
TYPe, 14–16
U
Units, 1–13, 6–10
UPLoad, 12–24
Uppercase, 1–12
URQ, 7–5
W
White space, 1–8, 6–9
X
XWINdow, 10–26
XXX, 5–5, 5–8
(meaning of), 1–7
Index
Index–4