Filter
Top Products
— 8 —
TABLE OF LOOSE PARTS
ITEM DESCRIPTION QUANTITY
A. Table saw assembly 1
B. Table extension wing 2
C. Rear table extension rail 2
D. Front table extension rail 2
E. Rail cover 6
F. Blade guard and splitter 1 each
G. Adhesive washer 5
H. Rip fence 1
I. Miter gauge 1
J. Dust chute 1
K. Blade wrench 1
L. Push stick 1
M. Dodo table insert 1
N. Blade 1
O. Handwheel handle & nuts 1 each
P. Handwheel and handle 1
Q Table extension hardware
Square nut 6
Hex hd. bolt M8x1.25-16 2
Hex hd. bolt M8x1.25-20 4
Hex.socket hd.cap bolt M8x1.25-16 6
Hex hd. bolt & washer M10x1.5-25 6
STAND
V. Top leg bracket 1
W. Bottom leg bracket 1
X. Leg 4
Y. Leg front bracket 1
Z. R & L leg bracket 1 each
AA. Foot and hardware 1 set
BB. Storage bracket & foot hardware 1 set
CC. Caster assemblies A 2
DD. Caster assemblies B 2
EE. Stand & caster mounting hardware 36
NOTE: To make assembly easier, keep contents of box
together. Apply a coat of automobile wax to the table.
Wipe all parts thoroughly with a clean dry cloth. This will
reduce friction when pushing the workpiece.
CARTON CONTENTS
UNPACKING AND CHECKING CONTENTS
WARNING
Separate all parts from packing materials. Check each part
with the illustration on the next page and the “Table of
Loose Parts” to make certain all items are accounted for,
before discarding any packing material.
WARNING
If any part is missing or damaged, do not attempt to
assemble the table saw, plug in the power cord, or turn
the switch ON until the missing or damaged part is
obtained and is installed correctly.