Filter
Top Products
TABLE OF CONTENTS
SECTION 8 − ELECTRICAL DIAGRAM 34........................................................
SECTION 9 − MIG WELDING (GMAW) GUIDELINES 36............................................
9-1. Typical MIG Process Connections 36......................................................
9-2. Typical MIG Process Control Settings 37....................................................
9-3. Holding And Positioning Welding Gun 38....................................................
9-4. Conditions That Affect Weld Bead Shape 39.................................................
9-5. Gun Movement During Welding 40.........................................................
9-6. Poor Weld Bead Characteristics 40........................................................
9-7. Good Weld Bead Characteristics 40........................................................
9-8. Troubleshooting − Excessive Spatter 41....................................................
9-9. Troubleshooting − Porosity 41.............................................................
9-10. Troubleshooting − Excessive Penetration 41.................................................
9-11. Troubleshooting − Lack Of Penetration 42...................................................
9-12. Troubleshooting − Incomplete Fusion 42....................................................
9-13. Troubleshooting − Burn-Through 42........................................................
9-14. Troubleshooting − Waviness Of Bead 43....................................................
9-15. Troubleshooting − Distortion 43............................................................
9-16. Common MIG Shielding Gases 44.........................................................
9-17. Troubleshooting Guide For Semiautomatic Welding Equipment 44...............................
SECTION 10 − PARTS LIST 46..................................................................
WARRANTY