Hobart Welding Products OM-240 438B Welding System User Manual


 
. A complete Parts List is available at wwwHobartWelders.com
OM-240 438 Page 24
5-6. Installing Exhaust Pipe
803 751 / Ref. 281 080-A
! Engine backfire can cause se-
vere burns or other injuries. Do
not point exhaust pipe toward
control panel. Keep away from
exhaust outlet.
! Point exhaust pipe in desired di-
rection but always away from
front panel and direction of trav-
el.
. Be sure to tighten exhaust clamp
nuts. Exhaust clamp supplied with
muffler.
Tools Needed:
1/2 in.
5-7. Connecting Or Replacing the Battery
244 033-A / 244 034-A/ Ref. S-0756-D
3/8, 1/2 in.
Tools Needed:
+
+
! Connect negative () battery
cable last..
To connect battery, open right side en-
gine access door.
1 Battery Holddown
To change battery, remove rear panel
with baffle and battery holddown.
Be sure battery cables are not pinched
when installing battery.
1