Hobart Welding Products OM-240 438B Welding System User Manual


 
. A complete Parts List is available at www.HobartWelders.com
OM-240 438 Page 35
8-5. Changing Engine Oil, Oil Filter, and Fuel Filter (Subaru-Powered Units)
244 032-A / Ref. 281 080-A / S-0842
! Stop engine and let cool.
1 Oil Drain Valve
2 Oil Filter
Change engine oil and filter accord-
ing to engine owner’s manual.
NOTICE Close valve and valve
cap before adding oil and running
engine.
Fill crankcase with new oil to full
mark on dipstick (see Section 5-4).
3 Fuel Filter
4 Fuel Line
Replace line if cracked or worn.
Install new filter. Wipe up any spilled
fuel.
Start engine, and check for fuel
leaks.
! Stop engine, tighten connec-
tions as necessary, and wipe
up fuel.
Tools Needed:
2
3
4
1
Full
Oil Check
Oil Fill