Support User Manuals

Invacare IOC100P Staple Gun User Manual

Open as PDF

of 32

SECTION 3—INSTALLING THE CONSERVING REGULATOR

Part No 1160840 17 Pneumatic Oxygen Conserver

NOTE:Forinformationonhowtooperatethecylinder,consult

yourequipmentprovider.

NOTE:Forthisprocedure,refertoFIGURE3.1.

1. LoosenthecylinderpostvalveT‐Handle.

2. Lowertheconserverover

anyCGA870postvalve

cylinderwiththe

alignmentpinstoward

theholesonthecylinder

neck.

3. Alignthetwopinsand

gasketwiththe

correspondingholeson

thecylinderpostvalve.

FIGURE 3.1 Attaching the

IOC100P to the Cylinder

NOTE:CylinderpostvalveT‐Handleshouldbealignedwith

indentationonpostvalve.

4. Whileholdingtheunitinplace,tightenthecylinderpost

valvebyturningclockwise.

5. Attachastandardcannula[7ft.(2.13m)orlessinlength]

totheoxygensupplyoutletfitting.

NOTE:Tightenonlybyhand.Theuseofatooltotightenthe

T‐Handlemaydamagetheunit.

previous next