Filter
Top Products
7
Unpacking
Upon delivery, open shipping containers and check
that all parts are in good condition. Any damage
should be reported to your distributor and shipping
agent immediately. Before proceeding further, read
your manual and familiarize yourself thoroughly
with assembly, maintenance and safety
procedures.
Compare the contents of your container with the
following parts list to make sure all parts are intact.
Missing parts, if any, should be reported to your
distributor. Read the instruction manual thoroughly
for assembly, maintenance and safety instructions.
Shipping Contents
01 Front Panel with Door (Stand)
01 Rear Panel (Stand)
02 Side Panel (Stand)
01 Shelf
02 M5x10 Screw
02 M5 Flat Washer
02 M5 Lock Washer
01 Extension Table Assembly
01 Drum Guard & Dust Port
01 Owner’s Manual
01 Warranty Card
01 Table and Motor Unit
01 Back Stop Bracket
01 Belt Tension Handle
01 Belt Tracking Tool
01 Miter Gauge Assembly
01 Sanding Belt
Cabinet Hardware
01 Lock Knob (20mm Length)
02 Lock Knob (12mm Length)
01 Lock Knob (35mm Length)
04 Cabinet Pads
04 5/16” x 5/8” Screws
22 5/16” Flat Washers
12 5/16” Hex Nuts
08 5/16” x 5/8” Hex Cap Bolts
02 5/16” x 1-1/4” Hex Cap Bolts
04 Larger O/D 5/16” Flat Washers
10 5/16” Lock Washers
Extension Table Hardware
05 1/4" x 5/8” Hex Cap Bolts
05 1/4" Flat Washers
05 1/4” Lock Washers
01 Bracket
02 10-24x3/4 Socket Head Cap Screws
Dust Chute Hardware
03 Pan Head Screws
Tools Needed for Assembly
2 12mm Wrench or sockets
1 10mm Wrench or sockets
1 Flat Head Screw Driver
1 Cross Point Screw Driver