Filter
Top Products
7
Unpacking
Remove mortiser and stand from the shipping cartons. Check for damage and ensure all parts are intact.
Any damage should be reported immediately to your distributor and shipping agent. Read the manual
thoroughly to familiarize yourself with the correct assembly and maintenance procedures and proper
safety precautions.
Contents of the Mortiser Carton
1 ea – Mortiser (not shown)
1. 1 ea – Wooden Table
2. 2 ea – M6 x 20 Phillips Head Screws
3. 2 ea – Handwheel Handles
4. 1 ea – Chuck Key
5. 1 ea – Chuck Removal Wrench
6. 1 ea – 23mm Box Wrench
7. 1 ea – Operating Handle
8. 1ea – Chuck Extension Adaptor
9. 2 ea – Chisel Bushings (3/4", 1-1/8")
Note: The Mortiser also comes with a 5/8"
bushing already installed.
10. 1 Work Stop Assembly
Contents of the Stand Carton
1 Stand (not shown)
1 Hardware package – (4) M8 x 45 Hex Cap
Screws, (4) M8 Lock Washers (not shown)
Contents of the Mortiser Carton