Filter
Top Products
Controls and Operation
OURGP12,0000001 –19–09JUN04–1/2
Testing Battery Installed in Vehicle
TYB4741 –UN–31AUG04
Control Panel
A—Charge Rate Switch
B—Charge Time Switch
C—6 Volt/12 Volt Battery Tester Switch
CAUTION: A marine (boat) battery must be
removed and charged on shore. To charge it
onboard requires equipment specially designed
for marine use.
Stay clear of fan blades, belts, pulleys, and
other parts that can cause injury.
Battery gases produced during charging can
explode. Ventilate area. Keep sparks and flames
away.
WARNING: Battery posts, terminals, and related
accessories contain lead and lead compounds, chemicals
known by the State of California to cause cancer and
reproductive harm. Wash hands after handling.
IMPORTANT: DO NOT plug battery charger into
power receptacle or set any charger
controls until ALL connections have
been made.
Turn all vehicle switches OFF (ignition,
lights, radio, etc.) before connecting
battery charger.
Turn all battery charger and time
switches OFF before connecting battery
charger.
NOTE: Unit serves as a voltmeter only, not as a load
tester.
Battery charger need not be plugged into AC
outlet to test battery.
1. Set charge rate switch (A) and charge time switch (B)
to OFF position.
2. Set the battery tester switch (C) to 6 Volt or 12 Volt to
match the voltage of the battery being tested.
15-5
091604
PN=20
Continued on next page