Filter
Top Products
Controls and Operation
OURGP12,0000002 –19–09JUN04–2/2
TYB4755 –UN–25JUN04
Battery Charger Connections
D—Insulated Jumper Cable
E—Positive (Red) Clamp
F—Negative (Black) Clamp
4. To keep a safe distance from the battery, attach an
6-gauge or heavier insulated jumper cable (D), at least
61 cm (24 in.) long, to the Negative battery terminal.
(Jumper cable is not provided.)
5. Connect Positive (red) clamp (E) of battery charger to
Positive terminal of battery. Rock or twist clamp back
and forth to improve connection.
6. Holding free end of jumper cable, stand as far from
battery as possible. Face away from battery, and
connect Negative (black) clamp (F) to free end of
jumper cable. Rock or twist clamp back and forth to
improve connection.
NOTE: For accurate battery voltage, turn headlamps on
for a couple minutes, then turn them off and wait
a couple minutes before reading meter.
7. Observe voltmeter color code indication to determine
battery charge.
OURGP12,0000118 –19–03JUN04–1/3
Charging Battery Installed in Vehicle
CAUTION: Risk of explosion. Battery gases
produced during charging can explode.
Ventilate area. Keep sparks and flames away.
Stay clear of fan blades, belts, pulleys, and
other parts that can cause injury.
NEVER charge a frozen battery.
A marine (boat) battery must be removed and
charged on shore. To charge it onboard
requires equipment specially designed for
marine use.
WARNING: Battery posts, terminals, and related
accessories contain lead and lead compounds, chemicals
known by the State of California to cause cancer and
reproductive harm. Wash hands after handling.
15-8
091604
PN=23
Continued on next page