Filter
Top Products
**&) *
#** R')" %*
&'+ &%#+,)* (Field Installed)
%)#&'+ &%*
':A6+92H:?8H:E92?2C4H6=56C42?42FD67:C6
6IA=@D:@?52>286E@6=64EC:4H:C:?8@CE@E962C4
H6=56C:75@?6:>AC@A6C=J+96FD6@72?2C4
H6=56C7@CA:A6E92H:?8:D?@E2AAC@G653JE96
*?@C:D:EC64@>>6?565@CDFAA@CE653J
#:?4@=?=64EC:4
------------------------------------------------------------------------
'@H6C'=F8":E"
A power plug kit for the auxiliary power receptacles is
available. (Provides a plug for each receptacle.)
*A2C<CC6DE@C":E"
Includes a heavy gage steel, approved spark arrestor,
clamp and adapter for mounting to the muffler exhaust
pipe.
+) #)"
Two-wheeled trailer with optional fender and light package.
For highway use, consult applicable federal, state, and local
laws regarding possible additional requirements. There is a
choice of 2 hitches, a fender & a light package.
2==:E49"
#F?6EE6J6:E49"
6?56C#:89E":E"
23=6)24<"
*6CG:46 ?5:42E@C":E "
Provides a GO / NO-GO visual indication of air clean-
er element useful service life. Filter service based on
restriction readings allows the longest life possible
from the filter and best engine protection.
*+ "&'+ &%*
**&)0*+"
Includes 35 feet (10 m) of electrode cable and 30 feet
(9 m) of work cable, headshield, work clamp and elec-
trode holder. Cable is rated at 500 amps, 60% duty
cycle.
)6>@E6@?EC@=":E"
Contains remote control rheostat and 100 ft. (30.5 m)
cable for adjusting the OCV at the welding site.
+ &'+ &%*
+ $@5F=6"
Provides high frequency and shielding gas control for
AC and DC GTAW (TIG) welding applications. Its
compact case is designed for easy carrying, complete
with a handle. High frequency bypass is built in.
Additionally, the K936-3 control cable is required if
remote control is used. If remote control is not used
the K936-4 control cable is required.
'+-+ +@C49"
Air cooled 200 amp torch equipped with valve for gas
flow control. 25Ft. length.
$28?F>'2CED":E@C'+-+ +@C49"'
@?EC@=23=6"C6BF:C657@C+ $@5F=6
Control cable for connecting the K930-2 TIG Module.
C4*E2CE*H:E49"C6BF:C657@C+ $@5F=6
Comes with a 25ft.(7.6m) cable.
Attaches to the TIG torch for convenient finger control.
@?E24E@C":E"C6BF:C657@C+ $@5F=6
Provide “Cold” tungsten Tip when welding with the
TIG Module.
@?EC@=23=6IE6?D:@?"
Allows the TIG Module to be operated at distances up
to 200 ft. from the power source.Available in 45 ft.
(13.7m).
.2E6C-2=G6":E"
For use with a water-cooled TIG torch. Installs inside
TIG Module.
.)% %