Filter
Top Products
A-1
INSTALLATION
COMMANDER 500
A-1
TECHNICAL SPECIFICATIONS - Commander 500 (K1639-1 & -2)
Make/Model Description Speed (RPM) Displacement Starting Capacities
System
Deutz 3 cylinder High Idle 1900 173 cu. in 12VDC battery Fuel: 25 gal.
F3L 912 44 HP(33 kw) Low Idle 1475 (2.83 L) & Starter 94.6 L
Diesel Engine @ 1800 RPM Full Load 1800
Bore x Stroke Oil: 9.5 Qts.
9.0 L
3.94” x 4.72”
(100mm x 120mm)
INPUT - DIESEL ENGINE
RATED OUTPUT - WELDER
HEIGHT
2
WIDTH DEPTH WEIGHT
42.0 in. 31.5 in. 63.1 in. 1638 lbs.(743 kg)
( Approx.)
1066.8 mm 800.1 mm 1602.7 mm
OUTPUT - WELDER AND GENERATOR
Duty Cycle Welding Output Volts at Rated Amps
100%
500 Amps (DC multi-purpose) 40 Volts
60%
550 Amps (DC multi-purpose) 36 Volts
50%
575 Amps (DC multi-purpose) 35 Volts
Welding Range Open Circuit Voltage Auxiliary Power
1
30 - 575 Amps CC/CV 80 Max OCV @1900 RPM 120/240 VAC
12,000 Watts, 60 Hz.
20 - 250 Amps TIG 100% Duty Cycle
PHYSICAL DIMENSIONS
1. Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.
2. Top of Enclosure. Add 8.9” (226.1mm) for exhaust.