Filter
Top Products
– 24 –
ACCESSORIES
OPTIONS / ACCESSORIES
• Hand Amptrol (K963)
• Foot Amptrol (K870)
• Arc Start Switch (K814)
• Magnum Cooler Horizontal TIG Mounting Bracket
(K559-2)
• Undercarriage (K932-1)
UNDERCARRIAGE FUNCTION
The Square Wave TIG 255 is designed to be used
with a Lincoln K932-1 Undercarriage. Complete
installation instructions are included with the K932-1
undercarriage. When the undercarriage is properly
installed, the Square Wave TIG 255 lift bail is non-
functional. Do not attempt to lift the power source with
the undercarriage attached. The undercarriage is
designed for hand moving only; mechanized towing
can lead to injury and/or damage to the Square Wave
TIG 255.
INSTALLATION OF FIELD INSTALLED OPTIONS
Instructions for connecting the K932-1 Undercarriage
and the K559-2 Magnum Cooler Horizontal TIG
Mounting Bracket are included with those
accessories.
Installation of the K963 Hand Amptrol, the K814 Arc
Start Switch and K870 Foot Amptrol are as follows:
Lift the Output Cover Door (if so equipped) on the
Square Wave TIG 255. Feed the cable up through the
strain relief holes in the base, and connect the 6-pin
MS-type (Amphenol) connector to the Remote
Receptacle (See Figure 2). Secure with the threaded
collar.