Filter
Top Products
Reversing switch action
CAUTION
*Always check the direction of rotation before operation
*Use the reversing switch only after the tool comes to
a
complete stop Changing the
*When not operating the tool, always set the reversing switch lever to the neutral posi-
direction of rotation before the tool stops may damage the tool
tion
This tool has
a
reversing switch to change
the direction
of
rotation Depress the
reversing switch lever from the A side for
clockwise rotation or from the B side for
counterclockwise rotation When the switch
lever is in the neutral position, the switch
trigger cannot be pulled
Reversing
switch
lever
Clockwise
Counterclockwise
Speed
change
To change the speed, first switch off the
tool and then slide the speed change lever
to the
"11"
side for high speed or
"I"
side
for low speed Be sure that the speed
change lever is set to the correct position
before operation Use the right speed for
your
job
-1
I1
Low
speed
t
High speed
t
-
Speed
change
lever
CAUTION:
*Always set the speed change lever fully to the correct position. If you operate the tool
with the speed change lever positioned half-way between the
"I"
side and
"11"
side, the
tool may be damaged.
*Do
not use the speed change lever while the tool is running. The tool may be damaged.
10