Filter
Top Products
Specific Safety Rules
1.
Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring. Contact with a "live"
wire
will
also make exposed metal parts
of
the tool
"live"
and
shock
the operator.
2.
Be aware that this tool is always
in
an operating condition, because
it
does
not have to be plugged into an electrical outlet.
3.
Always be sure you have a firm footing.
Be sure no one
is
below when using the
tool
in
high locations.
4.
Hold the tool firmly.
5.
Keep hands away from rotating parts.
6.
Do
not leave the tool running. Operate the tool only when hand-held.
7.
Do
not touch the drill bit or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
SYMBOLS
The followings show the symbols used for
tool.
v
....................................
volts
....................................
direct current
n,
....................................
no
load
speed
.../
min
...................................
revolutions or reciprocation per minute
b
....................................
number
of
blow
5