Filter
Top Products
GENERAL SAFETY
RULES
U’A(l(’J1
(For
All
Battery Operated
Tools)
WARNING!
Read and understand all instructions.
Failure
to follow all instructions listed below, may result
in
electric
shock,
fire and/or serious personal injury.
SAVE
THESE
INSTRUCTIONS
Work Area
1.
Keep your work area clean and well
lit.
Cluttered benches and dark areas invite
accidents.
2.
Do not operate power tools
in
explosive atmospheres, such as
in
the presence
of flammable liquids, gases, or dust. Power tools create sparks which may
ignite the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.
Electrical Safety
4.
A battery operated tool
with
integral batteries or a separate battery pack
must be recharged only
with
the specified charger for the battery.
A
charger
that may be suitable for one type
of
battery may create a risk of fire when
used
with
another battery.
5.
Use battery operated tool only
with
specifically designated battery pack.
Use of any other batteries may create a
risk
of fire.
Personal Safety
6.
Stay alert, watch what you are doing, and use common sense when operating
a power
tool.
Do not use tool while tired or under the influence of drugs,
alcohol, or medication.
A
moment
of
inattention while operating power tools
may result in serious personal injury.
7.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry.
or long hair can be caught
in
moving parts.
8.
Avoid accidental starting. Be sure switch is
in
the locked or
off
position before
inserting battery pack. Carrying tools with your finger on the switch or
inserting the battery pack into a tool
with
the switch on invites accidents.
9.
Remove adjusting keys or wrenches before turning the tool on.
A
wrench
or
a
key that is left attached to a rotating part
of
the tool may result
in
personal
injury.
10.
Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enable better control
of
the tool
in
unexpected situations.
11,
Use safety equipment. Always wear eye protection. Dust mask, non-skid
safety shoes, hard hat, or hearing protection must be used for appropriate
conditions.
3