Filter
Top Products
Models No.
Description
PRODUCT
T
ECHNICAL INFORMATION
CONCEPT AND MAIN APPLICATIONS
Specification
Standard equipment
Optional accessories
P 1/ 10
Dimensions: mm (")
Width (W)
with Hook
without Hook
Height (H)
Length (L) 293 (11-1/2)
125 (4-7/8)
146 (5-3/4)
319 (12-1/2)
AN911H
Construction Coil Nailer
AN911H is a construction coil nailer powered by high pressure air.
Maximum length 90mm (3-1/2inch) wire coil nail can be nailed.
Powerful driving make it possible to continuously fasten 28mm thickness
hard plywoods and lumber girders with 75mm shank length nails.
Other main advantages are as follows:
Thin and unique shape nose-tip
Magazine designed to make nail loading quick and easy
Protective bumpers
Safety goggles .............................. 1
Plastic carrying case ..................... 1
Oil supply ..................................... 1
Nose adapter (flat end type).......... 1
Note: The standard equipment for the tool shown above may vary
by country.
ø2.5mm shank ø6mm head conical roll
65mm smooth shank 65mm screw chisel shank
ø2.5mm shank ø6mm head flat roll
50mm smooth shank 50mm screw chisel shank
57mm smooth shank 57mm screw chisel shank
65mm smooth shank 65mm screw chisel shank
ø2.9mm shank ø7mm head flat roll
50mm screw chisel shank
57mm screw chisel shank
65mm screw chisel shank
71mm screw chisel shank
ø3.1mm shank ø7mm head flat roll
75mm screw chisel shank
85mm screw chisel shank
90mm screw chisel shank
ø3.1mm shank ø7.2mm head flat roll
75mm smooth shank
85mm smooth shank
ø3.1mm shank ø7.5mm head flat roll
90mm smooth shank
JIS compatible (formally called as N in Japan)
flat roll
45mm x ø2.5mm shank - ø5.8mm head
50mm x ø2.8mm shank - ø6.6mm head
65mm x ø3.1mm shank - ø7.3mm head
75mm x ø3.4mm shank - ø7.5mm head
90mm x ø3.8mm shank - ø7.9mm head
Conical nail for wood floor
ø2.1mm shank - ø4.2mm head
45mm screw chisel shank
50mm screw chisel shank
Hardened conical nail
ø2.5mm shank - ø5.6mm head
45mm smooth shank 50mm smooth shank
57mm smooth shank 65mm smooth shank
Plastic sheet collated hardened-nail
Wire coil nail
H
W
L
Soft grip
Protective bumpers
Depth control
Direction of air exhaust Forward from front head
Change of Wire coil nails
and Plastic sheet collated nails
Change of bump fire mode and
sequential mode
Magazine type
Nail capacity: Quantity
Open like clamshell
Trigger lock-off
Hook
Thickness of Steel plate
to be nailed
Wire coil nails
for wood
Plastic sheet
collated nails
for thin steel
Plastic sheet
collated nails for
cement board
Operating air pressure: MPa (psi)
ø2.5 x 45 ~ ø3.8 x 90
(ø0.099 x 1-3/4 ~ ø0.148x 3-1/2)
ø2.5 x 45 ~ ø2.5 x 50
(ø0.099 x 1-3/4 ~ ø0.099 x 2)
ø2.5 x 45 ~ ø2.5 x 65
(ø0.099 x 1-3/4 ~ ø0.099 x 2-1/2)
150, 200, 250, 300
Yes
Auto
Yes
No
Yes
3.2mm (1/8")
Yes
Yes
Height control inside Magazine Four stages
1.28~2.26
(185 ~ 320)
Nail
Net weight: kg (lbs) 2.3 (5.1)
ø2.52mm shank - ø5.5mm head
45mm screw chisel shank 50mm screw chisel
shank
Plastic sheet collated hardened-nail
ø2.52mm shank - ø5.5mm head
45mm smooth shank 50mm smooth shank
65mm smooth shank
Shank diameter
x Overall length:
mm(”)