Filter
Top Products
P 10/ 10
Repair
[3] ASSEMBLING/ DISASSEMBLING
[3]-8. Door cover section
(1) Attach Compression spring 4 (silver) and Compression spring 5 (black) to the specific places between Door and
Door cover using grease.
(2) Assemble Door cover to Door as illustrated in Fig. 31.
Note: As the notch of Door cover is difficult to fit into place of Door, Door cover is prone to be placed in wrong position.
Do not fail to fit Door cover into Door properly.
Do not mix up M4x8 Hex socket head bolt with M4x14 Hex socket head bolt.
M4x14 Hex socket head bolt is screwed until the top is not protruded out of the thread hole of Door.
Take the disassembling step in reverse.
Fig. 31
Fig. 32
DISASSEMBLING
ASSEMBLING
ASSEMBLING
[3]-9. Inlet cap, One touch joint
flat portion of
Inlet cap
hexagonal portion
of One touch joint
H22PM
When removing Inlet cap/ One touch joint H22PM, clamp this flat portion in vise, then turn the machine clockwise.
(Fig. 32)
Note: Be careful the direction to turn One touch joint H22PM or Inlet cap when disassembling. They have left handed
threads.
Notch of Door cover
Lock leverDoor
Compression spring 5
Compression spring 4 (silver)
Compression spring 5 (black)
Door cover
Flat washer 4
M4x8 Hex socket head bolt
M4x14 Hex socket head bolt