Filter
Top Products
P 4/ 10
Repair
[3] ASSEMBLING/ DISASSEMBLING
[3]-1. Head valve section
1) Loosen four M6x45 Hex socket head bolts and remove Top cap complete. (Fig. 3)
2) While filling one of two holes of Rear cushion with finger, blow the air into the other hole with air duster.
Rear cushion rises and can be removed from Top cap complete. (Fig. 4)
1) Assemble Rear cushion to Top cap.
2) Put nine Compression springs 4 into holes of Top cap complete.
3) Fit Head valve into Top cap complete carefully so as not to lean
any Compression springs 4. (Fig. 5)
DISASSEMBLING
Fig. 3 Fig. 4
Fig. 5
ASSEMBLING
M5x16 Hex socket
head bolt (4pcs.)
Top cap complete
with Rear cushion
Top cap complete
Compression
spring 4
Head valve
Housing set
Head valve guide
Rear cushion
Two holes
Filter
Top cap gasket
O-ring 6
Compression
spring 4 (9pcs.)
Head valve
Top cap
complete