Filter
Top Products
Specific Safety Rules
1.
Always be sure that the tool is switched off and unplugged before carrying
2.
Always lead the power supply cord away from the tool towards the rear.
3.
Do
not touch
the
blade or the workpiece immediately after operation; they
out
any
work on the tool.
.
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
SYMBOLS
The followings show the symbols used for tool.
................
volts
.................................
herts
.................................
hours
.............
amperes
.........................
minutes
.................................
alternating current
.................................
direct current
.................................
no load speed
alternating
or
direct current
.......................
Class I1 Construction
.....................
splash-proof construction
.................................
watertight construction
................................
revolutions or reciprocation per minute
U
.................................
number of blow
4