Filter
Top Products
Thickness gauge
I
--
The grooves
in
the die holder serve
as
the
thickness gauge for allowable cutting thick-
ness.
Cutting line
The notch in the die holder indicates your
cutting line. Its width is equal to the cutting
width. Align
the
notch
to
the cutting line on
the workpiece when cutting.
-
Gauge
for
cutting
stainless:
1.2
mm
Gauge
for
cutting
mild steel:
1.6
mm
Notch
Pre-lubrication
Coat the cutting line with machine oil to increase the punch and die service life. This is
particularly important when cutting aluminum
Cutting
method
Hold the tool
so
that the cutting head is
at
a
right angle
(90")
to the workpiece being
cut. Move the tool gently in the cutting
direction.
cutouts
Cutouts can be done by first opening
a
round hole over
21
mm in diameter which
the cutting head can be inserted into.
I
7