Filter
Top Products
MAINTENANCE
CAUTION:
Always be sure that the tool is switched
off
and unplugged before attempting to perform
inspection or maintenance.
Replacing carbon brushes
Remove and check the carbon brushes
Limit
mark
the same time. Use only identical carbon
brushes.
,-Brush
holder
cap
Use
a
screwdriver to remove the brush
holder caps. Take out the worn carbon
brushes, insert the new ones and secure
the brush holder caps.
Screwdriver
/
To
maintain product SAFETY AND RELIABILITY, repairs, any other maintenance or adjust-
ment should be performed by Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
9