Filter
Top Products
Cutting the corrugated
or
trapezoidal sheet metals
Set the die position
so
that the die faces the cutting direction either when cutting
at
an
angle
or
perpendicular to grooves in corrugated or trapezoidal sheet metals. Always
hold
the tool
body
parallel to the grooves with the cuttina head
at
a
right angle
(90")
to the cut-
ting surface as shown in Fig.
I
From the
top
view
Cutting at an
angle to grooves
sheet metal
From the side view
From the side view
Cutting head should
be
at a right
angle
(90")
to cutting surface.
8