Filter
Top Products
18 19
ACCESSORIES
WARNING
To reduce the risk of injury, always
unplug the tool before attaching or
removing accessories. Use only spe-
cifi cally recommended accessories.
Others may be hazardous.
For a complete listing of accessories refer to
your MILWAUKEE Electric Tool catalog or go
on-line to www.milwaukeetool.com. To obtain
a catalog, contact your local distributor or a
service center.
No. of Kerf
Cat. No. Description Teeth Thickness Diameter
48-40-4148 Framing/Ripping 18 .071" 8-1/4"
48-40-4150 Rip/Crosscut 24 .071" 8-1/4"
48-40-4152 Trim/Finish 40 .071" 8-1/4"
48-40-4154 Rip/Crosscut 24 .122" 8-1/4"
48-40-4156 Trim/Finish 40 .122" 8-1/4"
48-40-4158 Trim/Finish 60 .122" 8-1/4"
Hold Down Bar Kit (49-22-8100)
Holds thin, fl exible material in place, provid-
ing chatter-free cutting. Spring arms have
built-in nylon rollers to prevent material
from being marred. Will accept material up
to 3/4" thick.
Quick-Stop Gauging Kit (49-22-8102)
Allows you to quickly and accurately position
a sliding aluminum stop block to cut different
lengths of material.
Dust Collecting Kit (49-22-8105)
Self-contained kit collects dust and debris.
Requires a vacuum. MILWAUKEE recom-
mends using vaccum model numbers: 8911,
8912, 8925 and 8935. The attachment host
supplied with the kit has an inner diameter
of 1-1/2".
Dust Collecting Kit
Hold Down Bar Kit
Mid-way
Fence Kit
Quick Stop Gauging Kit
Extension Kit
Wheel Kit
Wheel Kit (49-22-8106)
Contains two wheels to allow 8" Saw to
become more portable.
Extension Kit (49-22-8108)
For easier cutting and best performance,
MILWAUKEE recommends using the Enx-
tension Kit when: cross-cutting workpieces
that extend beyond the blade by 5' or more
on one side; and when rip-cutting workpieces
longer than 6'.
Mid-Way Fence Kit (49-22-8110)
Allows you to cut small panels waist high on
the 8" Saw frame. Kit includes both right and
left-hand sides, 30" rulers, a manual stop
block, and quick-change wood fences.
Saw Blades
For best performance and the most accurate
cut, MILWAUKEE recommends using the
following blades in the chart.
FIVE YEAR TOOL LIMITED WARRANTY
Every MILWAUKEE electric power tool (including battery charger) is warranted to the original
purchaser only to be free from defects in material and workmanship. Subject to certain excep-
tions, MILWAUKEE will repair or replace any part on a electric power tool which, after examina-
tion, is determined by MILWAUKEE to be defective in material or workmanship for a period of
fi ve (5) years* after the date of purchase. Return the electric power tool and a copy of proof
of purchase to a MILWAUKEE factory Service/Sales Support Branch location or MILWAUKEE
Authorized Service Station, freight prepaid and insured, are requested for this warranty to be
effective. This warranty does not apply to damage that MILWAUKEE determines to be from
repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse,
alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
* The warranty period for Hoists (lever, hand chain, & electric chain hoists), Ni-Cd battery
packs, Work Lights (cordless fl ashlights), Job Site Radios, and Trade Titans™ Industrial Work
Carts is one (1) year from the date of purchase.
*There is a separate warranty for Li-Ion Battery Packs that accompany the power tools:
*Every MILWAUKEE Li-Ion Battery Pack is covered by an initial 1000 Charges/2 Years free
replacement warranty. This means that for the earlier of the fi rst 1000 charges or two (2) years
from the date of purchase/fi rst charge, a replacement battery will be provided to the customer
for any defective battery free of charge. Thereafter, customers will also receive an additional
warranty on a pro rata basis up to the earlier of the fi rst 2000 charges or fi ve (5) Years from
the date of purchase/fi rst charge. This means that every customer gets an additional 1000
charges or three (3) years of pro rata warranty on the Li-Ion Battery Pack depending upon
the amount of use. During this additional warranty period, the customer pays for only the
useable service received over and above the fi rst 1000 Charges/2 years, based on the date
of fi rst charge and number of charges found on the battery pack via MILWAUKEE’s Service
Reader. After 1000 charges/2 years from the date of purchase/fi rst charge, the customer will
be charged a prorated amount for the service rendered.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE
product. However, proof of purchase in the form of a sales receipt or other information deemed
suffi cient by MILWAUKEE, is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DE-
SCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF
EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU
SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LI-
ABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES,
OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED
TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY
PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CON-
DITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE
GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL
OTHER WARRANTIES.
This warranty applies to product sold in the U.S.A., Canada and Mexico only.
Please consult MILWAUKEE’s website www.milwaukeetool.com or call 1.800.SAWDUST
(1.800.729.3878) to locate your nearest service facility for warranty and non-warranty service
on a MILWAUKEE electric power tool.