Filter
Top Products
18 19
Cutting Compound Miters
The chart below identifi es miter and bevel settings for various types of compound miters. Always
make trial cuts in scrap material prior to making the cut in the workpiece.
4
Pitch
Sides
0°
6
45.00°
0.00°
5°
10°
15°
20°
25°
30°
35°
40°
45°
50°
55°
60°
65°
70°
75°
80°
85°
90°
5
7
89
10
36.00°
0.00°
30.00°
0.00°
25.71°
0.00°
22.50°
0.00°
20.00°
0.00°
18.00°
0.00°
44.89°
3.53°
35.90°
2.94°
29.91°
2.50°
25.63°
2.17°
22.42°
1.91°
19.93°
1.71°
17.94°
1.54°
7.82°
16.26°
14.51°
43.08°
44.56°
7.05°
35.58°
5.86°
29.62°
4.98°
25.37°
4.32°
22.19°
3.81°
19.72°
3.40°
17.74°
3.08°
44.01°
10.55°
43.22°
14.00°
42.19°
17.39°
4.98°
44.78°
0.00°
45.00°
9.85°
44.14°
18.88°
41.64°
22.91°
39.86°
26.57°
37.76°
29.84°
35.40°
32.73°
32.80°
35.26°
30.00°
37.45°
27.03°
39.32°
23.93°
40.89°
20.70°
35.06°
8.75°
29.15°
7.44°
24.95°
6.45°
21.81°
5.68°
19.37°
5.08°
17.42°
4.59°
34.32°
11.60°
28.48°
9.85°
24.35°
8.53°
21.27°
7.52°
18.88°
6.72°
16.98°
6.07°
33.36°
14.38°
27.62°
12.20°
23.56°
10.57°
20.58°
9.31°
18.26°
8.31°
16.41°
7.50°
32.18°
17.09°
26.57°
14.48°
22.64°
12.53°
19.73°
11.03°
17.50°
9.85°
15.72°
8.89°
30.76°
19.70°
25.31°
16.67°
21.53°
14.41°
18.74°
12.68°
16.60°
11.31°
14.90°
10.21°
29.10°
22.20°
23.86°
18.75°
20.25°
16.19°
17.60°
14.24°
15.58°
12.70°
13.98°
11.46°
0.00°
36.00°
0.00°
30.00°
0.00°
25.71°
0.00°
22.50°
0.00°
20.00°
0.00°
18.00°
3.62°
35.84°
2.88°
29.87°
2.40°
25.61°
2.07°
22.41°
1.82°
19.92°
1.62°
17.93°
7.19°
35.37°
5.73°
29.50°
4.78°
25.30°
4.11°
22.14°
3.62°
19.68°
3.23°
17.72°
10.65°
34.59°
8.50°
28.88°
7.10°
24.78°
6.12°
21.69°
5.38°
19.29°
4.81°
17.37°
13.95°
33.53°
11.17°
28.02°
9.35°
24.06°
8.06°
21.08°
7.10°
18.75°
6.34°
16.88°
17.07°
32.19°
13.71°
26.95°
11.50°
23.16°
9.93°
20.29°
8.74°
18.06°
19.96°
30.60°
16.10°
25.66°
13.54°
22.07°
11.70°
19.35°
10.31°
17.23°
9.23°
15.52°
22.62°
28.78°
18.32°
24.18°
15.44°
20.82°
13.36°
18.27°
11.79°
16.27°
10.56°
14.66°
25.03°
26.76°
20.36°
22.52°
17.20°
19.41°
14.91°
17.05°
13.17°
15.19°
11.80°
13.69°
27.19°
24.56°
22.21°
20.70°
18.80°
17.87°
16.32°
15.70°
14.43°
14.00°
12.94°
12.62°
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Miter
Bevel
Maintaining Tools
Keep your tool in good repair by adopting a
regular maintenance program. Before use,
examine the general condition of your tool.
Inspect guards, switches, tool cord set and
extension cord for damage. Check for loose
screws, misalignment, binding of moving
parts, improper mounting, broken parts and
any other condition that may affect its safe
operation. If abnormal noise or vibration oc-
curs, turn the tool off immediately and have
the problem corrected before further use.
Do not use a damaged tool. Tag damaged
tools “DO NOT USE” until repaired (see
“Repairs”).
Under normal conditions, re-lubrication is
not necessary until the motor brushes need
to be replaced. After six months to one year,
depending on use, return your tool to the
nearest MILWAUKEE service facility for the
following:
• Lubrication
• Brush inspection and replacement
• Mechanical inspection and cleaning
(gears, spindles, bearings, housing,
etc.)
• Electrical inspection (switch, cord,
armature, etc.)
• Testing to assure proper mechanical and
electrical operation
WARNING
To reduce the risk of injury, always
unplug your tool before performing
any maintenance. Never disassemble
the tool or try to do any rewiring on
the tool's electrical system. Contact a
MILWAUKEE service facility for ALL
repairs.
WARNING
To reduce the risk of injury, electric
shock and damage to the tool, never
immerse your tool in liquid or allow a
liquid to fl ow inside the tool.
MAINTENANCE
Cleaning
Clean dust and debris from vents. Keep
the tool handles clean, dry and free of oil
or grease. Use only mild soap and a damp
cloth to clean your tool since certain cleaning
agents and solvents are harmful to plastics
and other insulated parts. Some of these
include: gasoline, turpentine, lacquer thinner,
paint thinner, chlorinated cleaning solvents,
ammonia and household detergents con-
taining ammonia. Never use fl ammable or
combustible solvents around tools.
Repairs
If your tool is damaged, return the entire tool
to the nearest service center.
ACCESSORIES
WARNING
To reduce the risk of injury, always
unplug the tool before attaching or
removing accessories. Use only spe-
cifi cally recommended accessories.
Others may be hazardous.
For a complete listing of accessories refer to
your MILWAUKEE Electric Tool catalog or go
on-line to www.milwaukeetool.com. To obtain
a catalog, contact your local distributor or a
service center.