Filter
Top Products
Connecting & Starting the MultiAccess MultiAccess Quick Start Guide
10 Multi-Tech Systems, Inc. PN 82001423L
Network Setup
In the Network Setup > Interface you can define a host name for your MultiAccess, change the Ethernet 1 (eth0)
to your local IP and subnet mask for your local network, and change the IP address of the default Gateway to
your local gateway address.
1. Enter the Host name you have established for your local MultiAccess. Click Save.
2. Enter in the External Name server window the IP address of your domain name server (DNS).
3. Click the Add button to connect to your name server.
4. Change the default IP Address for the Network Card 1 to the IP address of your local network and change
the default Subnet Mask for the Network Card 1 to the subnet mask for your local network. Click Save.
5. Change your web browser address to the new address of your local network.
6. Change the Default Gateway IP address to the IP address of your gateway. Click Save.
Note:
The options for Network Card 2 are not shown in the above screen due to space limitations. The options
are the same as for Network Card 1.