Filter
Top Products
Connecting & Starting the MultiAccess MultiAccess Quick Start Guide
14 Multi-Tech Systems, Inc. PN 82001423L
Raw Mode - If Yes, this sets the TCP port to a RAW socket. User data is treated “as is” and the Telnet
Command Escape capability is disabled. If No, this allows the Telnet command parser to look for escape
sequences that are used to communicate control functions. A common example is to support RFC-2217 Com
Port Control.
Pool - If you want to access a specific modem, accept the default of No. Each modem will be given a specific
TCP port number, starting at 7000+. If you select pool = Yes, then all selected modems are accessed via port
number 6000 – creating a first available pool, starting with the lowest numbered tty port.
SSL - Support is made available when the usage is Modem Sharing with Authentication. This is only used
with SSL capable Telnet Clients. Site Certificate information needs to be configured appropriately. Contact
Multi-Tech Tech Support for additional information.
Idle Timer (seconds) - The Idle Timer, upon expiring, will hangup the modem and close the telnet socket.
Idle time is defined as no data flow in both directions. Any data sent or received across the socket will cause
the Idle Timer to start over. When there has been no data activity for the duration specified, the idle timer will
expire.
Monitor CD - Upon the modem disconnecting, the MultiAccess will close the telnet socket to the host
application server.
4. Click on the Save button.
If you are using your MultiAccess as a network fax server, you need to set up the Modem Usage menu to support
your configuration.
1. Click on the Usage drop down arrow and select Fax.
2. Click on the Modem up or down arrow and select the tty modem(s) for faxing. You can choose multiple
modems by holding down the shift key.
3. Click on the Save button.