Filter
Top Products
Connecting & Starting the MultiAccess MultiAccess Quick Start Guide
18 Multi-Tech Systems, Inc. PN 82001423L
User Authentication
To determine User Authentication you must define how the Radius Client is going to be used, that is, are you
using an external Radius Server on your network or are you going to use the Radius Server in the MultiAccess.
The Radius Client can point to either an external Radius Server or the Radius Server within the MultiAccess.
Note: When using the internal Radius Server, you must use the IP address of network card 1 (eth0).
Radius Client
1. Choose User Authentication >Radius Client.
2. Click on Line Interface and select the Line number you selected up in the Line Interface screen.
3. You can choose an Authentication Type, but Multi-Tech recommends leaving the Authentication Type at the
default radius.
4. We recommend that you leave Allow Local Logins set to the default of no.