Filter
Top Products
7-1
v1.0, September 2005
Chapter 7
Troubleshooting
This chapter provides information to help troubleshoot your Storage Central SC101. Basic
functioning, troubleshooting tips, and frequently asked questions are included.
Basic Functioning
If you have trouble setting up your SC101, check the tips below.
The storage area network has no power
• Make sure the power cord is connected to the storage area network.
• Make sure the power adapter is connected to a functioning power outlet. If it is in a power
strip, make sure the power strip is turned on. If it is plugged directly into the wall, verify that it
is not a switched outlet.
• Make sure you are using the correct NETGEAR power adapter supplied with your storage area
network.
No lights are lit on the storage area network
It takes a few seconds for the status light to be lit. Wait a minute and check the status light on the
storage area network.
Note: For up-to-date SC101 installation details and troubleshooting guidance visit
http://kbserver.netgear.com.