Omega Engineering 185-210 DUS Air Compressor User Manual


 
6
P/N: 307271
OWNER’S RESPONSIBILITY
Your new Boss air compressor was engineered, built and tested to ensure the user both dependable and
economical service. This compressor has also been certified as conforming to the applicable Noise Emission
standards of the Environmental Protection Agency.
Continuation of this unit’s performance depends upon the care it receives during use. Therefore, operation
and maintenance procedures described in this manual should be followed carefully. The operator and
service personnel responsible for the care of this unit should be thoroughly familiar with this information.
It is the owner’s and/or operator’s responsibility to perform all safety checks and to ensure that all lubrication,
maintenance instruction and recommended practices are followed for safe operation. If disassembly or
replacement is required, particularly of internal parts, we recommend the owner see his dealer and not
attempt the repair himself.
It is owner’s responsibility to ensure that the preventive maintenance program is followed at the recommended
intervals. Proper care and service will assure long service life with a minimum of problems and operating
expenses.
We recommend that the owner and operator be thoroughly familiar with the contents of the manual.
If you encounter difficulties which you cannot diagnose our service personnel are prepared to help you.
Our toll free number is 1-800-635-6587. Outside the continental United States and Canada our number is
219-324-7776.
The model and serial number information is requested on all correspondence. This information can be
found on the Model Number Identification Plate. The information contained on the identification plate
should be transferred to the cover page of the manual for future reference.
INTRODUCTION