Filter
Top Products
15
3. Preparing the nebuliser for use
EN
8. Attach the air tube.
1) Attach the air tube to the air connector on the compressor.
2) Attach the other end of the air tube to the air tube connector on the
medication tank.
Notes:
• Make sure that the air tube is securely attached to the compressor (main
unit) and nebuliser kit, and does not come loose. Twist the airtube plug
slightly when inserting it into the connectors to avoid the tube
disconnecting during use.
• Take care not to spill the medication when attaching the air tube. Keep
the nebuliser kit upright.
• Use the nebuliser kit holder as a temporary
holder for the nebuliser kit.
1
2
NE-C30_main.book Page 15 Tuesday, December 13, 2011 12:14 PM