Filter
Top Products
34
11. Using optional accessories
3) Attach the optional battery to the
charger.
Align the connectors on the battery and
charger, and press the battery until it
clicks into place. Charging starts and the
green charging indicator blinks.
2. After the battery is fully charged, remove the battery from the charger.
The green charging indicator changes from blinking to remaining
continuously lit when the battery is fully charged.
1) Unplug the AC adapter from the
power outlet, then disconnect the
charger.
2) While pressing the button on the side
of the battery, lift the battery off the
charger.
3. Mount the compressor on the battery.
Align the connector on the bottom of the compressor with that on the
battery and mount the compressor on the battery. Push the compressor
down until it clicks into place.
Note: To separate the compressor and battery,
press the push button on the side of the
battery and lift the compressor off the battery.
3
Charging Indicator blinks
Charging Indicator
remains lit
Push Button
Push Button
NE-C30_main.book Page 34 Tuesday, December 13, 2011 12:14 PM