Panasonic FP2 Welding System User Manual


  Open as PDF
of 28
 
Xxxxx Xxxxxxxx
Xxxxx Xxxxxxxx
FP2-MW
FP2-C1SL
FP2-SL2
Number of I/O points
Not insulated Voltage: 1 to 5V, -10 to +10V Current: 4 to 20mA, -20 to +20mA
Insulated Voltages, currents, thermocouples, resistance thermometer devices
R.T.D. type: Pt 100, JPt 100, JPt 1000 type
Voltage range: -10 to +10V Current range: 0 to 20mA Resolution: 1/4096
Transistor
Line drive
2, independent
4, independent
2, independent
4, independent
2
4
8
Tool software for positioning unit RTEX (English)
FP2-PN2AN
FP2-PN4AN
FP2-PN8AN
AFPS66510
1pps to 500kpps
1pps to 4Mpps
FP2-PP21
FP2-PP41
FP2-PP22
FP2-PP42
FP2-HSCT
FP2-HSCP
FP2-PXYT
FP2-PXYP
NPN output
PNP output
NPN output
PNP output
FP2-DA4
Number of
channels
10Mbps, 8192 points/8192 words, 99 units max. (VE mode), 254 units max. (FL-net), 2500m
For FP2SH only (Cannot be used for FP2)
Ethernet-compatible unit for FP2/FP2SH.
To be mounted on the CPU backplane
ET-LAN unit setting software (English)
For PLC links
Compatible with MEWNET-W/MEWNET-W2
Up to two blocks to be attached can be selected among RS485, RS232C, and RS422 blocks.
General-purpose serial communications, computer links, PLC links (MEWTNET-W0)
(For the multi-communication unit) 230kbps, 15m max.
(For the multi-communication unit) 230kbps, 1200m max.
(For the multi-communication unit) For PLC links (MEWNET-W0): 115kbps, 16 stations, 1,200m
For 1:1 communication between a PLC and a computer
RS232C x 2 ch Connection with a control panel is also possible
For communications with general-purpose RS232C devices
The serial input/output is executed by sequence commands
1ch
1ch
−
1ch
2ch
1ch
1ch
1ch
2ch
2ch
FP2-VE
FP2-ET1
AFPS32510
FP2-MW
FP2-MCU
FP2-CB232
FP2-CB422
FP2-CB485
FP2-CCU
FP2-SDU
FP2-AD8VI
FP2-AD8X
FP2-RTD
FP2-AD8VI
FP2-AD8X
FP2-RTD
Product numberControllable I/O points
Product number
Product number
Product number
Specification
Specification
Specification
Specification
Product name
Product name
Product name
Product name
FP2 Multi-wire link unit
FP2 CPU unit with S-LINK
FP2 S-LINK unit
Can connect as the remote I/O system MEWNET-F master station
Perfect for remote I/O systems using many points
Direct connection to SUNX Co., Ltd., S-LINK reduced-wiring system
CPU unit with 128 points x 2 channels
Direct connection to SUNX Co., Ltd., S-LINK reduced-wiring system
CPU unit with 128 points x 2 channels
Max. 2048 points per one unit
256 points at S-LINK section
128 points per one unit
FP2 Positioning unit RTEX
Control Configurator PM
FP2 Positioning unit
Multiifunction type
FP2 High-speed counter unit
FP2 Pulse I/O unit
FP2 MEWNET VE-link unit
FP2 ET-LAN unit
Control Configurator ET
FP2 Multi-wire link unit
FP2 Multi-communication unit
RS232C block
RS422 block
RS485 block
FP2 Computer
communication unit
FP2 Serial data unit
Output type Number of axes controlled Speed command
8 interrupt inputs 4-channel high-speed counter 8 comparison outputs
Input: 24VDC Output: 5 to 24VDC (0.1A, 12 points/0.8A, 4 points)
8 interrupt inputs 4-channel high-speed counter 8 comparison outputs
4 pulse output channels 4 PWM output channels
Input: 24VDC Output: 5 to 24VDC (0.1A, 12 points/0.8A, 4 points)
FP2 Analog
input unit
FP2 Analog output unit
Analog input: 8 channels
Analog input: 8 channels
R.T.D. input: 8 channels
Analog input: 4 channels
Notes: 1) Pressure welding socket is supplied. A special tool (part no. AXY52000) is needed for connection. Please purchase separately if you are using a terminal or flat
cable socket.
2) Please refer to “FPΣ (Sigma) Product Types” for Motor driver I/F terminal II.
3) Previous FP2 positioning units FP2-PP2 and FP2-PP4 are not compatible with the multi-function type FP2 positioning unit.
3)
AAAA
N/AAAA
N/AAAA
N/AAAA
AAAA
AAA A
A
A
A
A
A
A
A
A
A
N/A
A
N/A
FPWIN Pro
for Windows
FPWIN Pro
for Windows
Full version with English manual
Full version with German manual
Full version with French manual
Small version with English manual
Small version with German manual
Small version with French manual
English: Full type
English: Small type
FPWINPROFEN5
FPWINPROFDE5
FPWINPROFFR5
FPWINPROSEN5
FPWINPROSDE5
FPWINPROSFR5
CD-ROM for Windows
CD-ROM for Windows
A: Available, N/A: Not available
A: Available, N/A: Not available
*1 FP1, FP-M, and FP3/FP10SH have been discontinued.
25
Product Types
FP2/FP2SH
FP2
For FP2
FPSH
From
0.35µs
From
0.03µs
16k steps
FP2-C1
FP2-C1D
FP2-C1SL
FP2-C2
FP2-C2P
FP2-C3P
60k steps
60k steps
120k steps
Not available
Not available
Not available
Not available
Available (See below.)
Available (See below.)
Available
Available
Available
Not available
Not available
Available
Available
Available
Not available
Not available
Not available
Available
Available
Available
Not available
Not available
Not available
Available
Available
Available
Available
(See below.)
Available
(See below.)
Not available
Available
Available (See below.)
Available (Built-in)
Available (Built-in)
Available (Built-in)
Available (Built-in)
Available (Built-in)
Available (Built-in)
Available (Built-in)
Available (Built-in)
FP2-EM1
FP2-EM2
FP2-EM3
FP2-EM6
FP2-EM7
FP2-EM4
FP2-EM5
FP2-EM7
AFP5208
AFP5209
AIC50020
AIC52000
Expansion memory unit
F-ROM
EP-ROM
F-ROM
SRAM
FP2 Backplane
FP2 Expansion cable
H type
Conventional type
FP2-BP05
FP2-BP07
FP2-BP09
FP2-BP12
FP2-BP14
FP2-BP11MH
FP2-BP10EH
FP2-EC
FP2-EC2
FP2-PSA1
FP2-PSA2
FP2-PSA3
FP2-PSD2
Type
Number
of point
DC input
Relay output
Transistor output
NPN
Transistor output
PNP
DC input, Transistor
output NPN
DC input, Transistor
output PNP
16
32
64
6
16
16
32
64
16
32
64
Terminal
Connector
Connector
Terminal
Terminal
Terminal
Connector
Connector
Terminal
Connector
Connector
12 to 24VDC
24VDC
24VDC
5A, 2 points per one common
2A, 8 points per one common
0.5A (12 to 24VDC), 0.1A (5VDC)
0.1A (12 to 24VDC), 50mA (5VDC)
0.1A (12 to 24VDC), 50mA (5VDC)
0.5A (12 to24VDC), 0.1mA (5VDC)
0.1A (12 to 24VDC), 50mA (5VDC)
0.1A (12 to 24VDC), 50mA (5VDC)
FP2-X16D2
FP2-X32D2
FP2-X64D2
FP2-Y6R
FP2-Y16R
FP2-Y16T
FP2-Y32T
FP2-Y64T
FP2-Y16P
FP2-Y32P
FP2-Y64P
Connector
Connector
FP2-XY64D2T
FP2-XY64D7T
FP2-XY64D2P
FP2-XY64D7P
Note: Please refer to “FPΣ (Sigma) Product Types” for FP Memory Loader.
Notes: 1) For FP2 CPU unit, the capacity can be expanded up to 32k steps using the expansion RAM of the optional memory.
2) The expansion memory unit (optional memory) with clock/calendar function is required for FP2 CPU unit.
3) The expansion memory unit (optional memory) with comment input function is required for FP2 CPU unit.
Standard type CPU unit
CPU unit 64-point input
CPU unit with S-LINK
Standard type CPU unit
CPU unit with IC memory card interface
CPU unit with IC memory card interface
Expansion memory unit
F-ROM
EP-ROM
note 1)
note 2) note 3)
Available
Built-in RAM
Expansion RAM
ROM
IC memory card
Clock/calendar
Clock/calendar
Function
Specification
Specification
Specification
Specification
Comment input Expansion RAM ROM socket
Comment memory
Optional memory Other
Product number
Product number
Product number
Product number
Product number
Product number
Operation
speed
Product name
Product name
Product name
Product name
Product name
Product name
FLASH-ROM for program copy and ROM operation. Equivalent to SST-29EE010-120-4C-PH.
Enables writing with the programming tool when attached to the CPU unit.
EP-ROM for program storage and ROM operation. Equivalent to M27C1001-12F1.
A commercially available ROM writer is required.
ROM for FP2SH
FP2-C2
IC memory card (Small PC
card) for FP2SH CPU unit with
IC memory card interface
Socket for ftting ROM to the CPU unit
FLASH-ROM for program copy and ROM operation. Equivalent to SST-29EE020-150-4C-PH
Enables writing with the programming tool when attached to the CPU unit.
EP-ROM for program storage and ROM operation. Equivalent to M27C2001-150F1.
A commercially available ROM writer is required.
Backup unnecessary. Perfect for program memory. Used for readout when using data memory.
Perfect for data memory. Can also be used for program backup. Battery backups.
Note: Pressure welding socket is supplied. A special tool (part number AXY52000) is needed for connection. Please purchase separately if you are using a terminal or flat cable socket.
Connection
method
5-module type (for basic)
7-module type (for basic and expansion)
9-module type (for basic and expansion)
12-module type (for basic and expansion)
14-module type (for basic and expansion)
8 slots (for basic )
8 slots (for expansion)
0.6m
2m
FP2 Power supply unit
Input: 100 to 120VAC, Output: 2.5A
Input: 200 to 240VAC, Output: 2.5A
Input: 100 to 240VAC, Output: 5A
Input: 24VAC, Output: 5A
FP2 Input unit
FP2 Output unit
FP2 I/O mixed unit
Input 32
Output 32
Input 32
Output 32
Input 24VDC, Output 0.1A (12 to 24VDC), 50mA (5VDC)
Input 24VDC, Output 0.1A (12 to 24 VDC), 50mA (5VDC) with on pulse catch input
Input 24VDC, Output 0.1A (12 to 24VDC), 50mA (5VDC)
Input 24VDC, Output 0.1A (12 to 24 VDC), 50mA (5VDC) with on pulse catch input
For FP2, button type battery, CR2450 or equivalent
For FP2SH CPU unit, battery with cable
For blank slot
AFC8801
AFP8801
FP2-DM
Product number
Specification
Product name
Battery
Dummy unit
I/O units
FP2
For FP2
FPSH
From
0.35µs
From
0.03µs
16k steps
FP2-C1
FP2-C1D
FP2-C1SL
FP2-C2
FP2-C2P
FP2-C3P
60k steps
60k steps
120k steps
Not available
Not available
Not available
Not available
Available (See below.)
Available (See below.)
Available
Available
Available
Not available
Not available
Available
Available
Available
Not available
Not available
Not available
Available
Available
Available
Not available
Not available
Not available
Available
Available
Available
Available
(See below.)
Available
(See below.)
Not available
Available
Available (See below.)
Available (Built-in)
Available (Built-in)
Available (Built-in)
Available (Built-in)
Available (Built-in)
Available (Built-in)
Available (Built-in)
Available (Built-in)
FP2-EM1
FP2-EM2
FP2-EM3
FP2-EM6
FP2-EM7
FP2-EM4
FP2-EM5
FP2-EM7
AFP5208
AFP5209
AIC50020
AIC52000
Expansion memory unit
F-ROM
EP-ROM
F-ROM
SRAM
FP2 Backplane
FP2 Expansion cable
H type
Conventional type
FP2-BP05
FP2-BP07
FP2-BP09
FP2-BP12
FP2-BP14
FP2-BP11MH
FP2-BP10EH
FP2-EC
FP2-EC2
FP2-PSA1
FP2-PSA2
FP2-PSA3
FP2-PSD2
Type
Number
of point
DC input
Relay output
Transistor output
NPN
Transistor output
PNP
DC input, Transistor
output NPN
DC input, Transistor
output PNP
16
32
64
6
16
16
32
64
16
32
64
Terminal
Connector
Connector
Terminal
Terminal
Terminal
Connector
Connector
Terminal
Connector
Connector
12 to 24VDC
24VDC
24VDC
5A, 2 points per one common
2A, 8 points per one common
0.5A (12 to 24VDC), 0.1A (5VDC)
0.1A (12 to 24VDC), 50mA (5VDC)
0.1A (12 to 24VDC), 50mA (5VDC)
0.5A (12 to24VDC), 0.1mA (5VDC)
0.1A (12 to 24VDC), 50mA (5VDC)
0.1A (12 to 24VDC), 50mA (5VDC)
FP2-X16D2
FP2-X32D2
FP2-X64D2
FP2-Y6R
FP2-Y16R
FP2-Y16T
FP2-Y32T
FP2-Y64T
FP2-Y16P
FP2-Y32P
FP2-Y64P
Connector
Connector
FP2-XY64D2T
FP2-XY64D7T
FP2-XY64D2P
FP2-XY64D7P
Note: Please refer to “FPΣ (Sigma) Product Types” for FP Memory Loader.
Notes: 1) For FP2 CPU unit, the capacity can be expanded up to 32k steps using the expansion RAM of the optional memory.
2) The expansion memory unit (optional memory) with clock/calendar function is required for FP2 CPU unit.
3) The expansion memory unit (optional memory) with comment input function is required for FP2 CPU unit.
Standard type CPU unit
CPU unit 64-point input
CPU unit with S-LINK
Standard type CPU unit
CPU unit with IC memory card interface
CPU unit with IC memory card interface
Expansion memory unit
F-ROM
EP-ROM
note 1)
note 2) note 3)
Available
Built-in RAM
Expansion RAM
ROM
IC memory card
Clock/calendar
Clock/calendar
Function
Specification
Specification
Specification
Specification
Comment input Expansion RAM ROM socket
Comment memory
Optional memory Other
Product number
Product number
Product number
Product number
Product number
Product number
Operation
speed
Product name
Product name
Product name
Product name
Product name
Product name
FLASH-ROM for program copy and ROM operation. Equivalent to SST-29EE010-120-4C-PH.
Enables writing with the programming tool when attached to the CPU unit.
EP-ROM for program storage and ROM operation. Equivalent to M27C1001-12F1.
A commercially available ROM writer is required.
ROM for FP2SH
FP2-C2
IC memory card (Small PC
card) for FP2SH CPU unit with
IC memory card interface
Socket for ftting ROM to the CPU unit
FLASH-ROM for program copy and ROM operation. Equivalent to SST-29EE020-150-4C-PH
Enables writing with the programming tool when attached to the CPU unit.
EP-ROM for program storage and ROM operation. Equivalent to M27C2001-150F1.
A commercially available ROM writer is required.
Backup unnecessary. Perfect for program memory. Used for readout when using data memory.
Perfect for data memory. Can also be used for program backup. Battery backups.
Note: Pressure welding socket is supplied. A special tool (part number AXY52000) is needed for connection. Please purchase separately if you are using a terminal or flat cable socket.
Connection
method
5-module type (for basic)
7-module type (for basic and expansion)
9-module type (for basic and expansion)
12-module type (for basic and expansion)
14-module type (for basic and expansion)
8 slots (for basic )
8 slots (for expansion)
0.6m
2m
FP2 Power supply unit
Input: 100 to 120VAC, Output: 2.5A
Input: 200 to 240VAC, Output: 2.5A
Input: 100 to 240VAC, Output: 5A
Input: 24VAC, Output: 5A
FP2 Input unit
FP2 Output unit
FP2 I/O mixed unit
Input 32
Output 32
Input 32
Output 32
Input 24VDC, Output 0.1A (12 to 24VDC), 50mA (5VDC)
Input 24VDC, Output 0.1A (12 to 24 VDC), 50mA (5VDC) with on pulse catch input
Input 24VDC, Output 0.1A (12 to 24VDC), 50mA (5VDC)
Input 24VDC, Output 0.1A (12 to 24 VDC), 50mA (5VDC) with on pulse catch input
For FP2, button type battery, CR2450 or equivalent
For FP2SH CPU unit, battery with cable
For blank slot
AFC8801
AFP8801
FP2-DM
Product number
Specification
Product name
Battery
Dummy unit
Maintenance parts
Intelligent units for remote I/O control
Intelligent units for analog I/O
Positioning unit, high-speed counter unit and pulse I/O units
FP2/FP2SH
Product Types
08/2007
 previous next